Slick Products Garden Hose Foam Gun – Concentrated Soap Foam Blaster for Car, Truck, Motorcycle, Dirt Bike, ATV, UTV, Toy Hauler, Trailer, Motorhome, RV, and Boat
(as of Dec 01,2020 10:49:15 UTC – Details)
The Faster, Safer, & Easier Cleaning Experience
Slick Products Off-Road Wash is a super concentrated cleaning solution designed to remove heavy dirt and mud without stripping lubrication from bearings or pivot points.
Super Concentrated Motorsport Cleaning Solution Formulated to Be Safe on Paint, Plastics, and Metal Surfaces Quickly Removes Heavy Dirt and Mud Maintains Lubrication on Bearings and Chassis Preserve the Life, Look, and Value of Your Vehicle
The Off-Road Wash is a concentrated soap and must be diluted prior to use. 1 Bottle makes up to 4 Gallons. If using a bucket or garden sprayer mix 8oz. with 1 Gallon of water and apply. Unused product may be stored in safe place for future washes.
Garden Hose Foam Gun
The Off-Road Wash is a concentrated soap and must be diluted prior to use. If using the Garden Hose Foam Gun with setting at “0”, add 8oz. to the tank and fill remaining space with water. Unused product product may remain in tank for future washes.
Pressure Washer Foam Gun
The Off-Road Wash is a concentrated soap and must be diluted prior to use. If using the Pressure Washer Foam Gun add 8oz. to the tank and fill remaining space with water. Unused product product may remain in tank for future washes.
Step by Step Directions
Step 1 – Mix and Apply
Before application, scrape off areas with extra thick mud or pre-rinse with water. Dilute the concentrated Off-Road Wash to the proper ratio shown above or on the back of the bottle. Using a garden sprayer or foam gun, fully saturate dirty and muddy surfaces. Allow the wash to soak for 3-5 minutes without drying up. Keep the surface moist by misting with water. For best results agitate with soft bristle brush.
Step 2 – Scrub and Rinse
While the Off-road Wash is soaking, use the Multi-Purpose Cleaner & Degreaser to target greasy spots and areas with nasty grime or film residue. Apply a few squirts or as needed and agitate with a soft bristle brush. After 3-5 minutes has passed from initial application of Off-Road Wash, rinse the entire vehicle with a pressurized water source. (For best results use a pressurized nozzle on garden hose or pressure washer.)
Step 3 – Shine and Protect
After rinsing, use a microfiber towel to wipe down and dry all the surfaces. Apply the Multi-Surface Shine & Protectant to plastic, rubber, and vinyl surfaces. Hold can approximately 6-8 inches away, spray an even layer to coat the surfaces. Allow the product to sit for a few minutes before buffing, or leave for a wet look. (Do not apply to tire treads, seat, or areas that should not become slippery.)
Transforms Liquid Soap into a Foamy Wash
Speeds Up Cleaning Process
Attaches to any Standard Garden Hose
Made With Durable Plastic and High Quality Brass Fittings
Adjustable Dial for Increasing or Decreasing Soap Ratio
Be the first to review “Slick Products Garden Hose Foam Gun – Concentrated Soap Foam Blaster for Car, Truck, Motorcycle, Dirt Bike, ATV, UTV, Toy Hauler, Trailer, Motorhome, RV, and Boat”
There are no reviews yet.